| Yayınlanan İlanlar | 20 |
| Telefon | Giriş Yapmalısınız. |
| Alışlarım | Giriş Yapmalısınız. |
| İş Telefon | Giriş Yapmalısınız. |
| Lokasyon | Giriş Yapmalısınız. |
| Mail Adresi | Giriş Yapmalısınız. |
| Hakkında |
İlan No: #41076
İlan Tarihi: 14.1.2020
0 2831
MU-4 EVO Tube Integrated Amplifier with remote controller
Handcrafted in Poland
2x70W from 4xKT-120 tubes in push pull design
3x unbalanced RCA inputs
Frequency response +0/-3dB: 10Hz-70kHz
Specialized servo to constant tube in pair bias equalization Unique precise bias trim circuit +/-1mA
Remote controller with SWAROVSKI push-buttons Warm-up circuit
Low noise and distortion,
Microprocessor control
Headphones output
Available colors black
İlan No: #40272
İlan Tarihi: 2.6.2019
0 2261
M2Tech introduces the new Marley MkII Headphones Amplifier
M2Tech is proud to reveal the new Marley MkII Headphones Amplifier, designed to take the intimacy of headphones listening to new heights of pure pleasure.
The Marley MkII encompasses a wealth of technological solutions in the compact, yet stylish Rockstars Series case which fits every style of furniture thanks to its essential lines and minimal design.
Ease of use was the keyword of this new design. The Marley MkII can be operated by its front panel controls, as well as by its IR remote controller (same as the one used for the Young MkIII DAC/Preamplifier and the Nash Phono Preamplifier) and by Bluetooth Low Energy using the free app available for both Android and iOS.
The high contrast OLED display reports all the useful status information and allows for easily navigate the configuration menu.
The Marley MkII drives both single-ended and balanced headphones, by the 6.35mm (1/4”) jack and the 4-pin XLR connector on its front panel, thanks to its balanced, discrete components, FET-input power stage. This high bias, high speed design uses low inductance MELF resistors and Polyester capacitors for bypass and compensation.
Up to 10Vrms are available on the single-ended output when driving high impedance headphones, while at least 9Vrms are still available on 8 Ohms loads. The output voltage swing us twice on the balanced output.
A very low noise floor is mandatory when listening to headphones. That’s why the Marley MkII has adopted a dual, extremely low-noise, discrete components regulator that allows for an exceptionally detailed rendition of the musical flow.
This also allows for retrieving all details in the music signal even when the volume (set by the high performance MUSES72320 integrated volume control) is set to low levels.
When it comes to headphones listening, the driver-ear coupling is the main source of sound alteration, leading to tonal unbalance. That’s why the Marley MkII offers a 3-band tone control to compensate the tonal balance changes due to the driver-ear coupling. Purists can of course disable the tone control.
As well, headphones listening can be sometimes disappointing when listening to early stereo period tracks affected by the so-called “ping-pong effect” due to excessive channel separation. To reduce this effect, a cross-feed circuit can be activated which physiologically reduces the channel separation, leading to a more natural perception of the soundstage.
Finally, it’s important to perfectly match the driving impedance every headphones model requires: 32 Ohms designs require low impedance, while 600 Ohms models work best when the source has a higher output impedance. That’s why the Marley MkII allows to choose its output impedance between Low-Z, 10 Ohms and 47 Ohms.
Versatility is also an important feature for a headphones amplifier. The Marley MkII is provided with both single-ended and balanced inputs, plus a tape output and a preamplifier output (doubling the headphones single-ended output to RCA sockets on the back panel) which allow for driving a power amplifier. 12VDC trigger input and output on 3.5mm jacks are also available.
The performance of the Marley MkII can be further increased by powering it with the Van Der Graaf MkII ultra-low noise power supply through the 4-pin XLR supply connector on the amp’s back panel.
Specifications
Inputs: 2x single-ended (RCA) balanced (XLR) trigger (3.5mm jack)
Outputs: headphones single-ended (jack 6.35mm) headphones balanced (4-pole XLR) tape out (RCA) preamp out (RCA) trigger (jack 3.5mm)
Sensitivity: 1.6Vrm 5V (trigger)
Input impedance: 47 kOhms (single-ended) 20 kOhms (balanced)
Output impedance: Lo-Z/10 Ohms/47 Ohms (selectable)
Signal-to-Noise Ratio: 115dBA (single-ended) 118dBA (balanced)
THD+N: 0.0008% @ 9Vrms out on 8 Ohms
Output Voltage Before Clipping: 9Vrms (8 Ohms, Lo-Z)10Vrms (300 Ohms, Lo-Z)
Tone Controls: +/-12dB in 1dB stepsMuting:-20dB
Supply voltage: 15VDC or +15/-15/+5VDC
Power Consumption: 33W (9Vrms on 8 Ohms single-ended)0.5W (standby)
Size: 200x200x50mm (wxdxh)
Weight: net 2kg (including ancillaries)gross 2.5kg
İlan No: #39986
İlan Tarihi: 13.4.2019
0 2912
Location courtesy “Da Forum”, Livorno – www.daforumarredamentolivorno.it
The sound quality of equipment used to listen to music is overly important. In fact, it’s not only the music’s structure and texture to communicate us the emotions in the score, nor is only the musicians’ panache, sensibility and ability: the sound quality is fundamental to allow the music to effortlessly flow to our ears, brain and heart, with its content of details, nuances, small shifts in pitch and intensity, as well with its dynamic changes and, last but not least, its three-dimensional organization in the space before us.
An audio device which delivers a flat, boring rendition of the recorded musical event, one in which details are lost, dynamic flattened and the sound picture is lacking any depth, well, such device won’t be able to convey emotions, turning an emotive experience in a mere cerebral exercise which will bore the listener after a few minutes.
That’s why our Rockstars Series products are mainly made to emotionate, by delivering the whole musical event to the listener, with all its details, dynamic changes and with a 3D positioning of each instrument and singer as in the original event.
A complete hi-fi system can be composed with Rockstars Series products, user must only provide a turntable, one or more digital sources (including a computer) and two speakers.
M2Tech because…
Because you like music.
Because you think that good music deserves good sound, as music, sound and emotions belong to the same realm.
Because you like craftmanship which comes from passion, objects which are made as the consequence of a dream of life.
Because you think that research and innovation live side by side with passion and enjoyment.
Because your mind is open to new experiences.
Because you think that dividing the world into categories is like missing the fun in it.
Because you think that Tesla, Edison, Turing, Marconi and the other great visionaries behind us were right.
But maybe, you also choose M2Tech because you like good sound and italian style!
About M2Tech
Pisa, Tuscany, Italy, is home to M2Tech.
Pisa was birthplace of great scientists and mathematicians Galileo Galilei, Leonardo Fibonacci, Antonio Pacinotti and Ulisse Dini.
It was in Pisa that Enrico Fermi chose to create the first italian computer, in an evocative place called “Domus Galileiana”.
Guglielmo Marconi founded the first italian long wave radio station in the countryside near Pisa.
Virgo, the gravitational waves detector, is also near Pisa.
Famous composers like Vincenzo Galilei (Galileo’s father) and Giovanni Carlo Maria Clari were born or lived in Pisa.
One of the world’s most important sacred music festivals, “Anima Mundi”, is held every year in Pisa.
Living in Pisa means being continuously surrounded by the past, present and future of technology and science, at the same time experiencing a constant immersion in a rich musical environment. Walking along “Borgo Stretto”, Pisa’s old town central alley, it’s easy to meet students from Scuola Normale Superiore walking side by side with Nobel Prize winners, both reaching some church with a musical instrument in their hand to play in a baroque concert.
Therefore, is not strange that M2Tech mission is to put technology at service of music.
M2Tech mission is to design equipment to enjoy music at its best. We believe that the quality of the sound is fundamental to fully appreciate music, because the perception of the musical nuances in a musical performance, as well as the correct delivery of all the environmental sonic information that make the signature of the venue in which music is played and recorded, contribute to the emotional side of music listening. And music is all about emotions.
But there’s more. When we design a circuit, or a PCB, or write a firmware, we see beyond the mere mechanical exercise: for us, using a CAD or a software development tool is like being in front of a canvas with the brush in one hand and the palette in the other one, totally lost in the creative process. Because we love what we do and we feel that there’s more to a hifi piece of equipment than just a collection of electronic parts and a metal case.
We hope that you’ll like and love your M2Tech products the way we do!
İlan No: #39982
İlan Tarihi: 13.4.2019
0 3002
The clock is a constant rate beat, often produced by resonating quartz crystals, that gives pace to the digital circuits.
When it comes to high audio performance, the quality of the clock in a digital hi-fi unit is overly important. Clock’s short-term unstability, also called “jitter”, affects sound in many ways, from the increase of distortion and noise floor to the blurring of the sound picture and the loss of fine details.
A very high precision clock is therefore mandatory to squeeze the last bit of sound quality out of your DAC or amplifier. Of course, a precision clock has a cost that’s way higher than that acceptable for budget designs.
That’s why M2Tech offers the Evo Clock Two: users who purchased the Evo DAC Two Plus, the Evo PhonoDAC Two or the hiFace Evo Two may later allocate some more budget to increase their performance by adding the Evo Clock Two.
Extremely easy to use, its benefits go from the increased soundstage sharpness and details rendition to a darker background due to the lower noise floor, to lower distortion.
An innovative “way back link” from the Evo Two units to the Evo Clock Two (implemented by an optical connection to avoide ground loops which affect the clock pureness) allows for automatic clock frequency switching every time a track with different sampling frequency from the previous one is presented to the Evo Two unit for transfer or conversion.
Input:
clock information (Toslink)
Outputs:
master clock (BNC)
word clock (BNC)
Output voltage:
3.3Vpp (75 Ohms load)
Output impedance:
75 Ohms
Master clocks frequencies:
22.5792MHz
24.576MHz
10MHz
Word clocks frequencies:
32kHz
44.1kHz
48kHz
88.2kHz
96kHz
176.4kHz
192kHz
352.8kHz
384kHz
“Super” clocks frequencies:
5.6448MHz
6.144MHz
11.2896MHz
12.288MHz
Phase noise:
-155dB (100kHz dev.)
Supply voltage:
7.5VDC to 12VDC
Current consumption:
300mA
Size:
105x100x46mm (wxdxh)
Weight:
net 0.45kg (with ancillaries)
gross 0.6g
İlan No: #39979
İlan Tarihi: 13.4.2019
0 2731
High Resolution Class-D
Young MkIII ile mükemmel bir uyum sağlar.
Crosby, Young MkIII ile hem boyut hem de ses bakımından mükemmel bir çift elde ede- cek çok yönlü, yüksek verimli D sınıfı bir stereo güç amplifikatörüdür.
Temiz hoparlörü çoğu hoparlör için yeterliyken, köprü kabiliyetine ayarlayarak sürücü kabiliyeti geliştirilebilir. Bu durumda, Crosby güçlü bir mono amplifikatör olur; Köprü modundaki iki Crosby, neredeyse her hoparlörü çalıştırabilir; dinamik sürücüler dizisi ya da elektrostatik panel.
Tabii ki, Crosby sadece Young MkIII'ye değil her ön yükselticiye bağlanabilir. Hem tek uçlu hem de dengeli girişler, ayrıca tetik girişi / geçişi ile sağlanmıştır.
D sınıfı tasarımı sayesinde, imha edilmesi neredeyse imkansız, tüm aşırı yük durumları ön panelde rapor ediliyor.
İlan No: #39978
İlan Tarihi: 13.4.2019
0 3179
M2Tech Audio'dan Van Der Graaf MkII, Genç MkIII ve Nash'in yanı sıra Van Der Graaf MkII'nin mevcut çıkış gerilimlerinden birine ihtiyaç duyan diğer ürünler için çok düşük gürültülü bir güç kaynağıdır. Bir bataryadan aynı veya hatta daha iyi bir kaybolan düşük gürültü voltajına sahiptir.
Kullanılabilir dört çıkış, herhangi bir sipariş kullanıcının ihtiyacına göre etkinleştirilebilir. Van Der Graaf MkII, herhangi bir Rockstars Serisi uzaktan kumandadan açma / kapama komutlarını alan bir IR sensörü ile donatılmıştır. Bu şekilde, Van Der Graaf MkII, kullanıcı tarafından programlandığı gibi, basit bir uzaktan kumanda düğmesi ile çıkışlarını açabilir / kapatabilir.
Van Der Graaf MkII, dört çıktının tümünü kullanmak için gereken tüm kablolarla birlikte gelir.
İlan No: #39970
İlan Tarihi: 13.4.2019
0 3411
The Young MkIII gives you total control of the music flowing from your sources to the amplifier and then to the speakers.
With a wealth of input channels and extensive control options, you have always full command on your audio system, with the greatest confidence that the quality of the original music material is delivered to the speakers without any detriment.
Whether your source is a computer, a smartphone, a DVD player or a turntable, the Young MkIII delivers a crisp and alive analog sound at its outputs, to drive any amplifier at best.
You control it by the front panel encoder, using the remote control or by your Android smartphone via the same wireless connection which allows you to stream audio.
Streaming lovers will enjoy the high quality ensured by MQA©, while smartphone users will take advantage of aptX©.
M2Tech has adopted MQA to support master quality playback and streaming. MQA is an innovative encoding algorithm that captures the original master sound quality; ‘folds’ the file into a smaller size for easy streaming or download; and authenticates the file when it plays back on an MQA-enabled device.
M2Tech recognizes the sonic and technical advantages of MQA, therefore all M2Tech DAC products will include MQA in their format decoding pool.
Specifications
—
—
Inputs:
analog single-ended (RCA)
S/PDIF (RCA)
AES/EBU (XLR)
Optical (Toslink)
USB 2.0 high speed
Bluetooth©
Outputs:
analog balanced (XLR)
trigger (jack 3.5mm)
Sample frequencies:
PCM 44.1kHz to 384kHz
DoP 64X to 128X
Native DSD 64x to 256x
PCM resolution:
16 bits to 32 bits
Signal-to-Noise Ratio:
118dBA (single-ended)
120dBA (balanced)
THD+N:
0.0008% @ 5Vrms out balanced
Output Voltage:
2.5Vrms or 5Vrms (single-ended)
5Vrms or 10Vrms (balanced)
12VDC (trigger)
Output impedance:
100 Ohms (single-ended)
200 Ohms (balanced)
Input impedance:
47 kOhms (analog)
75 Ohms (SPDIF)
110 Ohms (AESEBU)
Supply voltage:
15VDC
Power Consumption:
4W (operational)
0.23W (standby)
Size:
200x200x50mm (wxdxh)
Weight:
net 2kg (including ancillaries)
gross 2.5kg
İlan No: #39968
İlan Tarihi: 13.4.2019
0 2959
Evo DAC Two Plus
High performance Digital-to-Analog Converter
The Evo DAC Two Plus offers all you may need from a Digital-to-Analog converter: wealth of input connections, high sampling rates, high resolution, versatility, remote control, preamplifier capability, compact size… Plus a great sound!.
Thanks to its premium Sabre DAC, the Evo DAC Two Plus delivers crystal-clear sound from every source, be it a high resolution file from your computer, a CD read by your CD transport or an MP3 from your smartphone, rivaling much more expensive units.
Its extreme versatility allows users to push its performance to the highest peaks, in a step-by-step fashion.
Thanks to the remote control, the Evo DAC Two Plus is the perfect preamplifier for desktop systems or for secondary systems in your bedroom or in your vacations home, particularly if you use it to drive active speakers or a compact power amplifier.
Do you want to buy this product? Visit our on-line shop or contact your local distributor.
Evo DAC Two Plus works great together with…
Evo Clock Two
to increase its sound quality by applying a high-precision clock which cleans up soundstage and unveils the finest details in the sound, at the same time giving the image pin-point precision.
Evo Supply Two
to further increase its sound quality by a low-noise power supply.
Specifications
Inputs:
SPDIF (RCA)
Optical (Toslink)
USB 2.0 high speed
I2S (HDMI, PS Audio standard)
external clock (BNC)
Outputs:
analog single-ended (RCA)
external clock info (Toslink)
Sample frequencies:
PCM 44.1kHz to 384kHz
DoP 64X to 128X
Native DSD 64x to 256x
PCM resolution:
16 bits to 32 bits
Signal-to-Noise Ratio:
120dBA
THD+N:
0.0005%
Output Voltage:
2.5Vrms
Output impedance:
2 Ohms
Input impedance:
75 Ohms (SPDIF and external clock)
110 Ohms (AESEBU)
100 Ohms (I2S)
Supply voltage:
7.5VDC to 15VDC
Power Consumption:
2.5W (@ 9VDC supply)
Size:
105x100x46mm (wxdxh)
Weight:
net 0,3kg
gross 0,7kg
İlan No: #39967
İlan Tarihi: 13.4.2019
0 3092
LOW JITTER, LOW PHASE NOISE, HIGH STABILITY OSCILLATORS Most audio interfaces and USB-provided DACs refer the data stream clock to the same USB interface clock, that often suffers a very heavy jitter (short range oscillator frequency variations). Thanks to two quartz precision oscillators used on M2Tech hiFace DAC, clock source for internal interface to the conversion IC features a very low jitter. Low jitter produces a very limited sound image distortion and degradation. Phase noise (main responsible for jitter) is also very low: this guarantees a short and long range clock stability, also reinforced by a board supply voltage regulation (e.g. at environmental temperature stability is 2-5ppm approximately, compared to 50-100ppm performed by oscillators normally used on commercial CD players).
USB 2.0 AUDIO COMPLIANCE No need for custom driver. Using the hiFace DAC is very easy. Just connect it to your Mac, iPad or Linux computer and it will be immediately visible in the devices list and ready to use. A driver is still necessary for Windows computers, which enables for DS, KS, WASAPI and ASIO mode.
COMPACT SIZE, EASE OF USE AND VERY HIGH PERFORMANCE M2Tech hiFace DAC features a very compact size and can be directly (or using an accessory USB A-A adapter, not supplied with hiFace) connected to a High Speed USB 2.0 port of any computer or tablet. A 3.5mm stereo jack socket provides an output stereo line-level signal, ready to be connected to a Hi-End system. No external power supply is required, as hiFace DAC draws its power from USB bus itself and regulates it with its internal regulators. hiFace DAC connected to a last generation mini PC provided with a High Speed USB port makes for a complete digital music source at very low prices (in the range of few hundreds Euros). Such system allows for listening any density and resolution music files (up to 384/32!), playing own CD's using a CD ROM drive, obtaining access to more than 10,000 web radio, many of which broadcast their transmissions with CD quality.
İlan No: #39937
İlan Tarihi: 8.4.2019
0 3214
Metrum Acoustics is pleased to announce the introduction of the FLINT, the baby Digital to Analog Converter with the unique Non-Oversampling sound quality you are familiar with. The first low entry, yet very powerful Digital to Analog converter from Metrum Acoustics comes to you with the renowned Metrum Acoustics DAC chips. The FLINT makes its launch in June 2018 and builds upon our years of experience in digital to analog converters. The FLINT combines high quality components known by thousands of Metrum Acoustics worldwide.
At Metrum Acoustics we are fanatic about building the best Digital to Analogue converters because of our love for making digital music sound sublime!
The FLINT is the ultimate companion for every distributed audio setup, like SONOS, but also because of its small size fits into any bedroom or other room where you require the most sublime digital sound. Sublime Digital sound for game consoles, distributed audio, or any other audio setup.
The ultimate companion to your FLINT, is the HiFace Two, a high value-for-money ratio Digital-to-Digital Converter to turn your computer into the main audio source for every hi-fi system provided with a digital input.
İlan No: #39936
İlan Tarihi: 8.4.2019
0 3149
With the goal of creating a very affordable, yet superior DAC in mind the designers of Metrum Acoustics have developed a new DAC, the ONYX By Metrum Acoustics.
ADDITIONAL INFORMATION
Weight 3.2 kg
Dimensions N/A
Voltage & Color
110V Silver Line USB, 110V Black Line USB, 230V Silver Line USB, 230V Black Line USB, 110V Silver Line I2S, 110V Black Line I2S, 230V Silver Line I2S, 230V Black Line I2S
Specifications
Balanced Digital to Analog Converter
24 Bits Non Oversampling
Forward (FPGA) corrected
2 DAC'S per channel in differential mode
15 VA toroidal transformer
110/115V AC 220/230V AC 60/50Hz
Input 1x optical, 1x coaxial 1x BNC and USB
Output 1x RCA Stereo Pair Single ended 2Volt RMS
Output 1 x stereo pair XLR: 4 Volt RMS
Frequency Response 44.1 kHz sampling 1Hz – 20 khz -1 dB
Frequency Response 192 kHz sampling 1Hz – 65 kHz – 1 dB 192 and 384kHz (USB)
Distortion 0.006 % THD
Noise Floor -145 dB related to 2 Volt RMS
Output impedance RCA 100 Ohm, XLR 100 Ohm
Sampling rate Optical 44.1 – 96 kHz
Sampling rate Coax and AES/EBU: 44.1 -192 kHz
Sampling rate USB 44.1 – 384kHz
Dimensions 290 x 250 x 60 mm
Weight 3.1KG
İlan No: #39931
İlan Tarihi: 8.4.2019
0 6887
MQA Ready
With the goal of creating a very special DAC in mind the designers of Metrum Acoustics have developed a new DAC.
Extreme NOS
The Pavane by Metrum Acoustics Pavane is the company’s flagship DAC.
ADDITIONAL INFORMATION
Weight 10 kg
Dimensions N/A
Voltage & Color
110V Silver Line USB, 110V Black Line USB, 230V Silver Line USB, 230V Black Line USB, 110V Silver Line I2S, 110V Black Line I2S, 230V Silver Line I2S, 230V Black Line I2S
Specifications
Balanced Dual Mono Non oversampling DAC
Forward (FPGA) corrected
4 DAC'S per channel in differential mode
45 VA via 3 separated toroidal transformers
110/115V AC 220/230V AC 60/50Hz
Input 1x optical, 2x coaxial 1x BNC and 1x RCA AES/EBU and USB
Output 1x stereo pair single ended 2 Volts RMS
Output 1x stereo pair XLR balanced 4 Volts RMS
Frequency Response 44.1 kHz sampling 1Hz – 20 khz -2.5 dB
Frequency Response 192 sampling 1Hz – 65 kHz – 3dB and 384kHz (USB)
Distortion 0.006% THD
Noise Floor -155 dB related to 2 Volt RMS
Output impedance RCA 100 Ohm, XLR 200 Ohm
Sampling rate Optical 44.1 – 96 kHz
Sampling rate Coax and AES/EBU: 44.1 -192 kHz
Sampling rate USB 44.1 – 384kHz
Dimensions 440 x 320 x 85 mm
Weight 10KG
İlan No: #39930
İlan Tarihi: 8.4.2019
0 3098
In this age of €20’000 DACs that drive stock Sabre with fixed outputs, variable Jade does more for less. And she still splits her 24-bit converter register into two halves to process the less/least significant bits like the more significant bits (at higher amplitude for better linearity) before resetting the lower half to the proper lower values in the analog domain; a scheme Cees calls error forward correction.
What can one say……….?
In this age of €20’000 DACs that drive stock Sabre with fixed outputs, variable Jade does more for less. And she still splits her 24-bit converter register into two halves to process the less/least significant bits like the more significant bits (at higher amplitude for better linearity) before resetting the lower half to the proper lower values in the analog domain; a scheme Cees calls error forward correction.
Read the full story here and be surprised what Jade and Onyx can do for you…..
Another continuation of the review after burning in the DAC, the JADE By Metrum Acoustics by #MasterAudioPoet Srajan Ebaen
Digital to Analog Conversion with Digital Pre Amplification
SPECIFICATIONS
Balanced and volume controlled DAC
24 Bits Non Oversampling
Forward (FPGA) corrected
2 DAC'S per channel in differential mode
15 VA toroidal transformer
110/115V AC 220/230V AC 60/50Hz
Input 1x optical, 1x coaxial 1x BNC and USB
Output 1x RCA Stereo Pair Single ended 2Volt RMS
Output 1 x stereo pair XLR: 4 Volt RMS
Frequency Response 44.1 kHz sampling 1Hz – 20 khz -1 dB
Frequency Response 192 kHz sampling 1Hz – 65 kHz – 1 dB 192 and 384kHz (USB)
Distortion 0.006 % THD
Noise Floor -145 dB related to 2 Volt RMS
Output impedance RCA 100 Ohm, XLR 100 Ohm
Sampling rate Optical 44.1 – 96 kHz
Sampling rate Coax and AES/EBU: 44.1 -192 kHz
Sampling rate USB 44.1 – 384kHz
Dimensions 290 x 250 x 60 mm
Weight 3.1KG
LEARN MORE ABOUT JADE IN THE METRUM ACOUSTICS STORE
İlan No: #39928
İlan Tarihi: 7.4.2019
0 3647
Metrum Acoustics is pleased to announce the introduction of the BABY AMBRE, the sibling of our wave making AMBRE ROON certified streamer. A great addition to the affordable FLINT Baby DAC. The first low entry, yet very powerful ROON certified streamer from Metrum Acoustics comes to you with the renowned Metrum Acoustics quality. The Baby Ambre makes its launch in January 2019 and builds upon our years of experience in digital to analog converters and streaming solutions. The BABY AMBRE combines high quality components known by thousands of Metrum Acoustics clients worldwide.
At Metrum Acoustics we are fanatic about building the best Digital to Analogue converters because of our love for making digital music sound sublime!
The BABY AMBRE is the ultimate companion for every distributed audio setup, like SONOS, but also because of its small size fits into any bedroom or other room where you require the most sublime digital sound. Sublime Digital sound for game consoles, distributed audio, or any other audio setup.
The ultimate companion to your BABY AMBRE, is the FLINT, a high value-for-money ratio Digital-to-Digital Converter to turn your computer into the main audio source for every hi-fi system provided with a digital input.
İlan No: #39925
İlan Tarihi: 7.4.2019
0 3090
DESCRIPTION
For a long time Metrum Acoustics has used hybrid (triode) amps for pleasure listening and critical evaluations. What we did not like was the fact that triodes suffer aging problems. In simulation software, we started to simulate triodes with fets instead. The good thing with triodes is their low gain and a lot of bandwidth without any need for feedback. As a result we realized a full class A high voltage fet circuitry having the right gain ,very good open loop bandwidth and low noise figures. A similarity is the high voltage of 350 Volts to get this circuit running. As a result an amazing linearity without any feedback was realized. From this point the circuit is driving a class A/B output section (10 watts in class A). Some little feedback is necessary to get the right gain but also improves the damping factor at the same time . Compared to our old hybrids, there’s no sonic difference, just less noise and lower distortion.
After two years of prototyping and testing, we’ve now turned this into a commercial product. The circuits are quite over-dimensioned to be sure that no errors occurs. Still we added a lot of protection to avoid any damage to your loudspeakers in case of malfunction. A soft start procedure is added to charge the amazing capacity of 176000µF. This huge capacity is available during complex and dynamic transients. As known hybrids combine tube sound and amazing control as realized by transistor designs. Here you have the solution. The “Forte” power amplifier will serve you without problems as known with normal hybrids but still having the holographic sound as known from good tube designs. The Forte is an addition to our awarded Adagio digital amplifier.
ADDITIONAL INFORMATION
Weight 18 kg
Dimensions N/A
Voltage & Color
110V Silver Line, 110V Black Line, 230V Silver Line, 230V Black Line
Specifications
Amplifier
50 Watt to 8 Ohm, 100 Watt to 4 Ohm, 170 Watt to 2 Ohm
Class A/B, 10 Watt Class A
Distortion 0.03% THD
Damping Factor 200
110/115V AC 220/230V AC 60/50Hz
Output Noise 300 µV RMS
Frequency Response 10-60.000 Hz – 3DB
Slew Rate 50V / µSec
Input Impedance RCA 15 KOhm, XLR 60 KOhm
Input Sensitivity RCA 240 mV RMS for 1 Watt, 1.75 V for 50 Watt, XLR 480 mV RMS for 1 Watt, XLR 480 mV RMS for 1 Watt, 3.5 V for 50 Watt
Max Power 400 Watt
Main Voltage 110/115V AC, 220/230V, 60/50Hz
"Bütün seslerde, aynı canlı performansı duyuyorum. Kayıtlar, tüm doğal tınılarında açıkça görülebilen ahşap, çelik ve deri ile çok dinamik performanslar yakaladı." Richard Varey, Witchdoctor is a online entertainment magazine.
İlan No: #39924
İlan Tarihi: 7.4.2019
0 6829
DAC / PREAMPLIFIER
DESCRIPTION
What more can you do after launching one of the best dac’s available today? We are aware that our current flagship Pavane is hard to beat but at least one idea was not realized yet. The idea of having a decent volume control to prevent a necessary pre-amplifier could improve performance dramatically. However, we also know that the way of introducing such device in the signal chain can also have a negative effect.
Experiments were made and as result the best sound was coming directly from our Transient™ modules. Even the digital approach did not convince us but still one idea was not tried yet. Especially in case of R2R ladder dac’s it is quite easy to change the output voltage of the dac by changing its reference voltage but to realize this, dedicated dac boards were designed to get the best regulation possible.
Like our Pavane, “forward correction” techniques are used to drive both mono dac boards. The result of this process is an extremely high linearity, right down to -140 dB, which gives the Adagio a realistic 24 bit dynamic range. The Adagio is a step forwards as it omits a pre-amplifier. It is musical, honors the Non-oversampling principle and simultaneously incorporating the technological progress that has been made over the years.
Bazı incelemelerden:
“Adagio DAC, dosya sunucusundan gelen sinyali değiştirmez: örnek, aşırı örnek veya filtre içermez. Bu, oldukça tatmin edici ve tarafsız bir müzik dinleme deneyimi yaratır.” Richard Varey Witchdoctor is a online entertainment magazine.
“Dönüştürücülerdeki referans voltajını düşürerek veya yükselterek hacim kontrolünün akıllıca uygulanması, daha önce hiç görmediğim bir şeydi ve kusursuz çalışıyor. Hangi ses seviyesini ayarlıyorsanız sesin kalitesinde, çözünürlüğünde veya aklınıza gelebilecek herhangi bir şekilde değişmeyecektir.” René van Es, the-ear.net, Hi-Fi Music Gear Magazine
“Farkında olduğum tek diğer üst kısım katı, 24 bitlik ikili kodunun farklı bölümlerini ayrı toplamadan önce ayrı ayrı işlemek için birden fazla R2R merdiveni kullandığı ve saf ses kontrolü için referans gerilimini ayarlayan ses rüyası DAC’tır.“ Srajan Ebaen, 6moons.com
DESCRIPTION
ADDITIONAL INFORMATION
ADDITIONAL INFORMATION
Weight 10 kg
Dimensions 54 × 43 × 22 cm
Voltage & Color
110V Silver Line USB, 110V Black Line USB, 230V Silver Line USB, 230V Black Line USB, 110V Silver Line I2S, 110V Black Line I2S, 230V Silver Line I2S, 230V Black Line I2S
Specifications
24 Bit balanced dual mono volume controlled DAC
Non oversampling DAC
Forward (FPGA) corrected
4 DAC'S per channel in differential mode
75 VA via 3 separated toroidal transformers
110/115V AC 220/230V AC 60/50Hz
Input 1x optical, 2x coaxial 1x BNC and 1x RCA AES/EBU and USB
Output 1x stereo pair single ended variable max. 2 Volts RMS
Output 1x Stereo pair XLR: variable max. 4 Volt RMS
Frequency Response 1Hz – 20 khz -2.5 dB. 44.1 kHz sampling
Frequency Response 1Hz – 65 kHz – 3dB .192 and 384kHz (USB)
Distortion 0.006 % THD
Noise Floor -155 dB related to 2 Volt RMS
Output impedance RCA 100 Ohm, XLR 320 Ohm
Sampling rate Optical 44.1 – 96 kHz
Sampling rate Coax and AES/EBU: 44.1 -192 kHz
Sampling rate USB 44.1 – 384kHz
Dimensions 440 x 320 x 85 mm
Weight 10KG
İlan No: #39922
İlan Tarihi: 6.4.2019
0 3417
The ultimate combination of a powerful Digital to Analog converter, powered by a ROON Endpoint!
The Amethyst is our new entry model using our praised “forward correction technology“. Due to this technology a real 24 bits performance is realized and probably the most advanced way to give R2R technology new dimensions. As a result music will be more exiting as details on very low levels will be audible. The Amethyst can meet the best systems today in terms of sound quality as it borrows all the good things from our top models Pavane and Adagio.
Like her predecessor the Amethyst is designed for the same basic frame but electronics have been redesigned for future tasks. In addition we have implemented a new and powerful headphone amplifier having its own volume control.
The Amethyst is using two Transient R2R ladder DAC TWO modules. These modules can handle extreme high sampling rates but are limited to current industry standards which has its maximum (384kHz) on the USB input. The result of this process is an extremely fast and accurate behavior and brings listening experience on a much higher level.
The AMBRE makes its launch in April 2018 and builds upon our years of experience in digital to analog converters. The AMBRE Endpoint combines high quality components known by thousands of Metrum Acoustics worldwide and combines it with the user-friendly interface from Roon Labs.
At Metrum Acoustics we are fanatic about building the best Digital to Analogue converters because of our love for making digital music sound sublime!
Because of this dedication to perfection we can truly appreciate listening experiences like ROON.
Using the powerful USB connection between the two devices will give you a seamless listening experience which unrivaled! *
İlan No: #39919
İlan Tarihi: 5.4.2019
0 3329
Metrum Acoustics, Dutch, DAC'leri Üretti, Küresel Olarak Duyuldu!
Metrum Acoustics, Dijital - Analog dönüştürücüler, Dijital Pre Amplifier ve Power Amplifier lider üreticisidir.
Bir ALL-Engineering B.V. markası olan Metrum Acoustics, Dijital ve Analog Dönüştürücüler'in benzersiz doğal sesi ile sürekli olarak uluslararası basında dalga yarattı.
AMETİST
METRUM ACOUSTICS'in Adagio ve Pavane Level III modellerinden damlatma teknolojisi, artık en uygun fiyata sunuluyor
Aurix’in Transformer Volume Control’üne alternatif olarak… Metrum Acoustics’in entegre bir tasarımı.
Gücün düzgün ve verimli bir şekilde verilmesini sağlamak için bol miktarda işlem gücü ve önemli enerji rezervuarları sağlayan iki DAC TWO Modülü.
Konvansiyonel analog ses kontrolü… doğrudan D / A çıkış panosuna bağlı - detaylı kalitede ses sağlar.
Bununla birlikte, pastanın üzerine krema… Metrum Akustiği'nin Ametistinin de içeride olanı eşleştirmek için “görünüşe” sahip olması.
Ametist, övgüye değer “ileri düzeltme teknolojimizi” kullanan yeni METRUM ACOUSTICS'in giriş modelidir. Bu teknoloji sayesinde gerçek bir 24 bit performans gerçekleştirilir ve R2R teknolojisine yeni boyutlar vermenin muhtemelen en gelişmiş yolu olur. Sonuç olarak, müzik çok daha heyecan verici olacak, çünkü çok düşük seviyelerdeki detaylar duyulabilir. Ametist, METRUM ACOUSTICS'in en iyi modelleri olan Pavane ve Adagio'dan alınan tüm iyi şeyleri ödünç aldığı için, ses kalitesi açısından bugünün en iyi sistemlerini karşılayabilir.
Başta 6moons.com sitesinden olmak üzere pek çok övgü alan bir DAC'ın
"Kendi testlerimizde, gerçek bir 24 bit DAC olduğunu iddia eden Metrum'un amiral gemisi Adagio DAC kullanıyoruz. Bu DAC ile ilgili iyi haber şu ki dijital alanda filtreleme yapmıyor, bu yüzden burada sunulan herhangi bir sesli DSP farkı bu DAC üzerinde genişliyor." www.432evo.be sitesini değerlendirmesi
SPECIFICATIONS
24 bits Non oversampling DAC
Forward (FPGA) corrected
1 DAC per channel in differential mode
30 VA with toroidal transformer
110/115V AC 220/230V AC 60/50Hz
Input 1x optical, 2x coaxial and USB
Output : 2 Volt RMS
Volume controlled headphone connection
Max load 16 Ohms
Frequency Response 44.1 kHz sampling 1Hz – 20 khz -1dB
Frequency response 192 kHz sampling 1Hz – 65 kHz -1dB
Distortion 0.006 THD
Noise Floor -145 DB related 2 volt rms
Output impedance RCA 100 Ohm. Headphone output 3 Ohms
Sampling rate Optical 44.1 – 96 kHz
Sampling rate Coax 44.1 -192 kHz,
Sampling rate USB 44.1 kHz -384 kHz
Dimensions 19 x 6 x 25 cm
Weight 2.5KG
İlan No: #39496
İlan Tarihi: 18.1.2019
0 3266
Detaylı bir sesi var, Tasarım Harikası
İlan No: #39494
İlan Tarihi: 18.1.2019
0 4294
Hi-End Müzik Seti
Çalışıyor ve sesi detaylı
Kozmetik olarak %90
özelliklerini yazdığım web sitesinden inceleyebilirsiniz.
Amplifikatörler
Hoparlörler
Kablolar
Dijital Aletler
Analog Aletler
Aksesuar, DIY
Profesyonel Sistemler
Diğerleri
Haber, Kampanyalar
Satıcılar, İthalatçılar
Odyofil Sistemler
Yazı, Makaleler
