Marley Mk2 Headphones Amplifier

Tıkla Paylaş

İlan No
40272
Eklenme Tarihi
2.6.2019
Marka
M2tech
Model
Marley
Durum
Yeni
Kargo
Diğer
Tahmini Kargo Maliyeti
0
Gönderim Maliyeti
Alıcıya Ait
Gönderim Yeri
Tüm Dünya (Worldwide)
Fiyat
2130 EUR 2.130 EUR
Kullanıcı Bilgileri
Kullanıcı
herbalife
Puan
stars
Ülke
TÜRKİYE
Şehir
Isparta
Paylaş
Ürün Açıklaması

M2Tech introduces the new Marley MkII Headphones Amplifier M2Tech is proud to reveal the new Marley MkII Headphones Amplifier, designed to take the intimacy of headphones listening to new heights of pure pleasure. The Marley MkII encompasses a wealth of technological solutions in the compact, yet stylish Rockstars Series case which fits every style of furniture thanks to its essential lines and minimal design. Ease of use was the keyword of this new design. The Marley MkII can be operated by its front panel controls, as well as by its IR remote controller (same as the one used for the Young MkIII DAC/Preamplifier and the Nash Phono Preamplifier) and by Bluetooth Low Energy using the free app available for both Android and iOS. The high contrast OLED display reports all the useful status information and allows for easily navigate the configuration menu. The Marley MkII drives both single-ended and balanced headphones, by the 6.35mm (1/4”) jack and the 4-pin XLR connector on its front panel, thanks to its balanced, discrete components, FET-input power stage. This high bias, high speed design uses low inductance MELF resistors and Polyester capacitors for bypass and compensation. Up to 10Vrms are available on the single-ended output when driving high impedance headphones, while at least 9Vrms are still available on 8 Ohms loads. The output voltage swing us twice on the balanced output. A very low noise floor is mandatory when listening to headphones. That’s why the Marley MkII has adopted a dual, extremely low-noise, discrete components regulator that allows for an exceptionally detailed rendition of the musical flow. This also allows for retrieving all details in the music signal even when the volume (set by the high performance MUSES72320 integrated volume control) is set to low levels. When it comes to headphones listening, the driver-ear coupling is the main source of sound alteration, leading to tonal unbalance. That’s why the Marley MkII offers a 3-band tone control to compensate the tonal balance changes due to the driver-ear coupling. Purists can of course disable the tone control. As well, headphones listening can be sometimes disappointing when listening to early stereo period tracks affected by the so-called “ping-pong effect” due to excessive channel separation. To reduce this effect, a cross-feed circuit can be activated which physiologically reduces the channel separation, leading to a more natural perception of the soundstage. Finally, it’s important to perfectly match the driving impedance every headphones model requires: 32 Ohms designs require low impedance, while 600 Ohms models work best when the source has a higher output impedance. That’s why the Marley MkII allows to choose its output impedance between Low-Z, 10 Ohms and 47 Ohms. Versatility is also an important feature for a headphones amplifier. The Marley MkII is provided with both single-ended and balanced inputs, plus a tape output and a preamplifier output (doubling the headphones single-ended output to RCA sockets on the back panel) which allow for driving a power amplifier. 12VDC trigger input and output on 3.5mm jacks are also available. The performance of the Marley MkII can be further increased by powering it with the Van Der Graaf MkII ultra-low noise power supply through the 4-pin XLR supply connector on the amp’s back panel. Specifications Inputs: 2x single-ended (RCA) balanced (XLR) trigger (3.5mm jack) Outputs: headphones single-ended (jack 6.35mm) headphones balanced (4-pole XLR) tape out (RCA) preamp out (RCA) trigger (jack 3.5mm) Sensitivity: 1.6Vrm 5V (trigger) Input impedance: 47 kOhms (single-ended) 20 kOhms (balanced) Output impedance: Lo-Z/10 Ohms/47 Ohms (selectable) Signal-to-Noise Ratio: 115dBA (single-ended) 118dBA (balanced) THD+N: 0.0008% @ 9Vrms out on 8 Ohms Output Voltage Before Clipping: 9Vrms (8 Ohms, Lo-Z)10Vrms (300 Ohms, Lo-Z) Tone Controls: +/-12dB in 1dB stepsMuting:-20dB Supply voltage: 15VDC or +15/-15/+5VDC Power Consumption: 33W (9Vrms on 8 Ohms single-ended)0.5W (standby) Size: 200x200x50mm (wxdxh) Weight: net 2kg (including ancillaries)gross 2.5kg

İlan Özellikleri
Yenisinin Satış Fiyatı:
2130 EUR
İlgili Web Sitesi:
Takasa Açık:
Hayır
Pazarlığa Açık:
Hayır
Kutusu Var:
Hayır
Kullanma Klavuzu:
Yok
Durum:
Yeni
Ayıplar:
Yeni ürün
Ödeme Seçenekleri:
Banka Havalesi İle Peşin