Artesania audio prestige rack 3

0 EUR 4.600EUR
Ürün ID:
41510
İlan Tarihi:
1.5.2020

Kategori:

Müzik Seti Sehpası

Durum:
Yeni
Marka:
Artesani̇a audi̇o
Model:
Presti̇ge rack 3
Beğeni:
0
Görüntüleme:
3872
Takas:
Hayır
Pazarlık:
Hayır
Kutusu:
Evet
Teslimatı/Kumandası:
Var
Kargo:
Diğer
Gönd. Yer.:
Dünya (Worldwide)
Kargo Maliyeti:
Alıcıya Ait
Tah. Karg. M.:
0
Ödeme:
Kullanıcı Profili:

Tıkla Paylaş

Ürün Açıklaması:

ARTESANIA PRESTIGE RACK PLATFORM A stainless steel, anti-magnetic structure supports a specially treated base to set up a turntable or other components. Different versions and materials are available. Check accessories brochure. STAINLESS STEEL TOP ATTACHMENTS ON RACK UPRIGHTS Each top is made with conical recess to support the spikes of the turntable platform. EXTERNAL STRUCTURE It ́s made of metal filled with special particles and elastomers. The uprights have a diameter of 60 mm. These factors create a rack heavy, resistant and stable. The resonance coefficient of the structure is significantly lowered. The paint used is textured for diffusion purposes. INTERNAL SUSPENDED STRUCTURE Isolated from external structure. Eliminates vibrations that are transmitted from solid and acoustic sources through the creation of decouples; steel needles supported on isolating discs. These provide extra tiers of anti- resonant protection. This suspended audio rack has a triple decoupling. TEFLON CILINDERS Support the internal structure and isolates from the external structure. (Diameter 38 mm) EARTH TERMINAL To connect electronics (essential for phono) Check manual to connect properly if is necessary. LINEAR ARMS Arms made from anti-magnetic stainless steel. The arms hold adjustable spikes (can be located in different positions) also support isolating discs and damping pads. Total flexibility in different positions and easy to change. BRIDGE BAR Height variable rear rods strengthen the external structure to guarantee stability and ensure free easy access to install components. INTERNAL FRAME These frames are adjustable in height to place any size of component properly. They are locked on the vertical stainless steel bars of the suspended structure. LINEAR ARMS Arms made from anti-magnetic stainless steel. The arms hold adjustable spikes (can be located in different positions) also support isolating discs and damping pads. Total flexibility in different positions and easy to change. This system allows to set up the best support position to place electronic components. ISOLATION DISCS Support each of the electronic components (without any need for shelves). Easy installation facilitated by an elastic insert which provides stability to place electronic components on the adjustable spikes. STABILIZER BAR Located in the internal structure they stop the tiniest pendular movement of the internal structure. Four in each rack, located at the lowest part of the internal structure. Check manual to use it properly. DECOUPLING BASE Stainless steel discs support the spikes of the uprights. Two types of floor pads are included, with different sonic behavior, depending on the room acoustics. Check manual to use the proper pads for the bases. TECHNICAL SPECIFICATIONS: Rack Weight 34 Weight Supported 170 DIMENSION Total height 93 cm Internal distance between legs 53 cm Total depth 46 cm Total net space between tiers 60 cm Usable depth Adaptable on depth Support Stand (including 4 mass Dampers)

Sıfır kutuda
Kullanıcı Bilgileri:
Kullanıcı:
Mavi hifi
Puan: stars
Ülke:
TÜRKİYE
Şehir:
İstanbul
İlçe:
Kadıköy