Hovlan Saphire Power Ve Hb100 Pre Takım

Etkileyici sesi ve tasarımı ile nadir bir takımdır Hovland Saphire Power AMP Specifications: Amplifier output power: 40 watts/channel stereo; 80 watts monaural Input sensitivity: 0.91 volts for 40 watts Input impedance: 680 KOhm, unbalanced Amplifier voltage gain: 26 dB, non-inverting, 8 Ohm load Frequency response: +/-0.2dB, 20 Hz – 20,000 Hz Output impedance: 4 Ohm, 8 Ohm, 16 Ohm stereo / 2 Ohm, 4 Ohm 8 Ohm monaural A-weighted S/N ratio: 82 dB below 1 watt out Harmonic distortion, 1 Watt/channel: <0.1%, 20 Hz and I KHz / <0.2%, 10 KHz Harmonic distortion, 40 Watts/channel: <1%, 1 KHz / <3%, 10 KHz Tube complement: Driver (2) 12AU7, Output (4) EL34 Power requirement: 2A, 120V 50-60 Hz, adjustable for worldwide voltages Casework dimensions: 18.5” W x 17.5” D x 8.125” H (with feet) Net weight: 82 pounds (37 kilograms) HB100 PRE AMP Description: Vacuum-tube full-function preamplifier with built-in phono stage and optional MC step-up transformer module. Line-stage tube complement: two 12AX7s, one 12AT7. Phono stage tube complement: two 12AX7s, one 12AU7. Line-stage: Voltage gain: 14dB. Frequency response: 10Hz-25kHz, +0/-0.25dB. S/N Ratio: 80dB (wideband) ref. 3V out, (with level control fully clockwise). THD: ±1% at rated output. Output impedance: approximately 2500 ohms. Input impedance: 100k ohms. MC phono stage: Voltage gain: 66dB at 1kHz. Frequency response: 25Hz-25kHz, ±0.15dB. S/N Ratio: 60dB (wideband) ref. 2mV input signal, 75dB ref. 2mV input using 400Hz high-pass filter. Input impedance: 450 ohms. Dimensions: 18.25″ W by 5.25″ H (including feet) by 17.375″ D (including knobs and rear jacks). Weight: 27 lbs.